Product - Specs

• Minimum Excavator Weight 45,000 LBS (single kelly bar)
• Minimum Excavator Weight 60,000 LBS (double kelly bar and/or 180 degree swivel mount)
• 14,000 foot pound hollow core motor (operates off the bucket circuit)
• 6 degree side to side tilt with in cab indicators
• 5 foot mast slide (for positioning, reaching over casing, and aid in transport)
• 8,000 pound chain drive crowd and retract system (recommend 5,000 pound maximum drill
string weight)
• 3 foot long foot stabilizer (for stabilizing – not used in short auger drilling)
• 5 foot manual kelly bar extension
• Controls (except drill motor) are all one bi-directional proportional foot pedal using 6 function
selection switch in the cab. Mast hydraulics, valving, foot pedal, in-cab control box and cables
supplied with drill.
• Sled travel = 32 feet
• Drill weight = 12,000 to 15,000 LBS (options dependent)

Drilling Parameters:
• Short auger drilling – 48” DIA. to 40 feet with single kelly bar
– 48” DIA. to 60 feet with double Kelly bar
• Auger drilling to 8 foot Diameter
• Continuous Flight Augers – 16” Diameter to 32 feet
– 12” Diameter to 50 feet
– 8” Diameter to 100 feet
– 6” Diameter to 150 feet
– 4” Diameter to 250 feet
• Down Hole Hammers and other drill strings – same as Continuous Flight Augers